10kw
120/208/240Vac AC output
MODEL | (US Standrd)NP8K | (US Standrd)NP10K | CAN BE SET |
INVERTER OUTPUT | |||
Rated Output Power | 8,000W | 10,000W | |
Max.Peak Power | 16,000W | 20,000W | |
Rated Output Voltage | 120/240Vac(split phase/single phase) | Y | |
Load Capacity of Motors | 5HP | 6HP | |
Rated AC Frequency | 50/60Hz | Y | |
Waveform | Pure Sine Wave | ||
Switch Time | 10ms(typical) | ||
Parallel capacity | / | ||
Overload | After triggering the overload protection the inverter wil resume output after 3 minutes, 5 consecutive overloads will switch off the output until the inverter is restarted. | ||
BATTERY | |||
Battery Type | Li-ion / Lead-Acid / User Defined | Y | |
Rated Battery Voltage | 48Vdc | ||
Voltage Range | 40-60Vdc | Y | |
Max.MPPT Charging Current | 200A | Y | |
Max.Mains/Generator Charging Current | 100A | 120A | Y |
Max.Hybrid Charging Current | 180A | 200A | Y |
PV INPUT | ||
Num. of MPP Trackers | 2 | |
Max.PV array power | 11,000W | |
Max.input current | 22/22A | |
Max.Voltage of Open Circuit | 500Vdc | |
MPPT Voltage Range | 125-425Vdc | |
MAINS / GENERATOR INPUT | ||
Input Voltage Range | 90-140Vac | |
Frequency Range | 50/60Hz | |
Bypass Overload Current | 63A | |
EFFICIENCY | ||
MPPT Tracking Efficiency | 99.9% | |
Max. Battery Inverter Efficiency | 92% | |
GENERAL | ||
Dimensions | 620*445*130mm(2*1.5*0.4ft) | |
Weight | 27kg(59.5Ib) | |
Protection Degree | IP20, Indoor Only | |
Operating Temperature Range | -10~55℃,>45℃ derated (14~131F,>113F derated) | |
Noise | <60dB | |
Cooling Method | Internal Fan | |
Warranty | 2 Years | |
COMMUNICATION | ||
Embedded Interfaces | RS485 /CAN / USB / Dry contact | Y |
External Modules(Optional) | Wi-Fi/GPRS | Y |
CERTIFICATION | ||
Safety | IEC62109-1,IEC62109-2,UL1741 | |
EMC | EN61000-6-1,EN61000-6-3, FCC 15 class B | |
lateral view
Suggestions for using
the Products
- Hybrid inverter YH-SunSmart 10K
- Hybrid inverter YH-SunSmart 10K
- Hybrid inverter YH-SunSmart 10K
1.90~140Vac AC input voltage range.
2.125-500Vdc wide voltage range for PV access
3.Higher input DC current up to 22A in asingle circuit.
4.Compatible to both residential single phase& two phase equipment.
5.Energy saving mode function to reduceno-load energy losses.
The hybrid inverter is upgraded on the basis of the solar inverter.
It contains the functionality of a solar inverter to convert direct current to alternating current,
and also adds a built-in solar controller such as the MPPT or PWM type.
Therefore, the hybrid inverter is a solar inverter with a built-in charge controller.
It can also be a combination of off-grid inverters and grid-connected inverters in a machine.
The hybrid inverter can realize the functions of both off-grid and grid-connected systems.
The power of hybrid inverters is usually between off-grid inverters and grid-connected inverters,
and is suitable for some small-scale places, such as small villages, resorts, etc
Application
Intelligent charging portable power station YYC-P300
View more >
YP-L51.2V 200Ah Household Power
View more >
